Posts: 29
Threads: 4
Joined: Dec 2019
In addition to the skill tree in my other thread, I am trying to spice up my battle mechanics for my project.
I am currently working on the second actor, which is a priest.
For this actor, I am looking for a script that can allow skills/states to create a bubble shield, similar to WoW.
Example:
Priest casts bubble shield on actor 1.
Actor will negate 300 damage (or a different amount) before the shield runs out and his HP will be damaged.
I have found multiple scripts that could help me do this, like KStates from Kyonides and Passive Augments from Xelias.
However, both are pretty big with a lot of options and I was looking for something lightweight.
I found one in this thread that does exactly what I am looking for: https://save-point.org/thread-771.html?highlight=absorb
But when I test it, the numbers don't match up.
The damage shown does not add up to the amount of the bubble and even when it pops,
the actor's HP goes down by an amount that is different from the damage shown.
Demo link for the script: https://gofile.io/?c=1IGLR9
I hope someone can help me out with this.
Posts: 29
Threads: 4
Joined: Dec 2019
Bump.
Can anyone help me with this?
I'm willing to pay 5 euros for a functional script.
Posts: 449
Threads: 18
Joined: Sep 2015
I looked around a bit and found this.
I haven't tested it but maybe it works for you?
Code: #==============================================================================
# ** Power Word: Shield Status Effect
#------------------------------------------------------------------------------
# The_Falcon
# 1.0
# 1.1.07
# SDK Version : 2.3 - Parts 1
#==============================================================================
# This script overwrites the following methods:
#------------------------------------------------------------------------------
# Game_Battler : attack_effect , skill_effect , slip_damage_effect
#------------------------------------------------------------------------------
# This script aliases the following methods:
#------------------------------------------------------------------------------
# Game Battler : initialize , add_state
#==============================================================================
#How to use:
#
#Add the script under the SDK. Then you'll need to make a new state and change the PWS_ID #in the script to the ID of the effect. Then make the skills and whatnot so you can use the #new effect goofy
#Also, keep in mind, the shield is NOT meant to be dispelled, so any dispel effects will #probably screw the system up a bit.
#==============================================================================
#------------------------------------------------------------------------------
# * SDK Log Script
#------------------------------------------------------------------------------
SDK.log('Power Word: Shield Status Effect', 'The_Falcon', 1.0, '01.01.08')
SDK.check_requirements(2.3, [], [])
#--------------------------------------------------------------------------
# Begin SDK Enabled Check
#--------------------------------------------------------------------------
if SDK.enabled?('Power Word: Shield Status Effect')
PWS_ID = 17 #ID of the power word shield state
PWS_PERCENT = 0.2 #The percent of health you want PWS to absorb
#==============================================================================
# ** Game_Battler
#------------------------------------------------------------------------------
# This class deals with battlers. It's used as a superclass for the Game_Actor
# and Game_Enemy classes.
#==============================================================================
class Game_Battler
#--------------------------------------------------------------------------
# * Public Instance Variables
#--------------------------------------------------------------------------
attr_reader :pws_hp # Strength of PWS
#--------------------------------------------------------------------------
# * Object Initialization
#--------------------------------------------------------------------------
alias pws_init initialize
SDK.log_alias(:Game_Battler, :initialize, :pws_init)
#--------------------------------------------------------------------------
def initialize
pws_init
@pws_hp = 0
end
#--------------------------------------------------------------------------
# * Add State
# state_id : state ID
# force : forcefully added flag (used to deal with auto state)
#--------------------------------------------------------------------------
alias pws_add_state add_state
SDK.log_alias(:Game_Battler, :add_state, :pws_add_state)
#--------------------------------------------------------------------------
def add_state(state_id, force = false)
if state_id == PWS_ID
@pws_hp = Integer(self.maxhp * PWS_PERCENT)
end
pws_add_state(state_id, force)
end
# log the overwrite
SDK.log_overwrite(:Game_Battler, :attack_effect)
#--------------------------------------------------------------------------
# * Applying Normal Attack Effects
# attacker : battler
#--------------------------------------------------------------------------
def attack_effect(attacker)
# Clear critical flag
self.critical = false
# First hit detection
hit_result = (rand(100) < attacker.hit)
# If hit occurs
if hit_result == true
# Calculate basic damage
atk = [attacker.atk - self.pdef / 2, 0].max
self.damage = atk * (20 + attacker.str) / 20
# Element correction
self.damage *= elements_correct(attacker.element_set)
self.damage /= 100
# If damage value is strictly positive
if self.damage > 0
# Critical correction
if rand(100) < 4 * attacker.dex / self.agi
self.damage *= 2
self.critical = true
end
# Guard correction
if self.guarding?
self.damage /= 2
end
end
# Dispersion
if self.damage.abs > 0
amp = [self.damage.abs * 15 / 100, 1].max
self.damage += rand(amp+1) + rand(amp+1) - amp
end
# Second hit detection
eva = 8 * self.agi / attacker.dex + self.eva
hit = self.damage < 0 ? 100 : 100 - eva
hit = self.cant_evade? ? 100 : hit
hit_result = (rand(100) < hit)
end
# If hit occurs
if hit_result == true
# State Removed by Shock
remove_states_shock
#-------------------------------------------
#If the shield has strength
if state?(PWS_ID)
if pws_hp > self.damage
# Substract damage from the shield's strength
@pws_hp -= self.damage
self.damage = "Absorb"
else
# Substract remaining strength from damage
self.damage -= @pws_hp
# Substract damage from HP
self.hp -= self.damage
remove_state(PWS_ID)
end
else
# Substract damage from HP
self.hp -= self.damage
end
#-------------------------------------------
# State change
@state_changed = false
states_plus(attacker.plus_state_set)
states_minus(attacker.minus_state_set)
# When missing
else
# Set damage to "Miss"
self.damage = "Miss"
# Clear critical flag
self.critical = false
end
# End Method
return true
end
# log the overwrite
SDK.log_overwrite(:Game_Battler, :skill_effect)
#--------------------------------------------------------------------------
# * Apply Skill Effects
# user : the one using skills (battler)
# skill : skill
#--------------------------------------------------------------------------
def skill_effect(user, skill)
# Clear critical flag
self.critical = false
# If skill scope is for ally with 1 or more HP, and your own HP = 0,
# or skill scope is for ally with 0, and your own HP = 1 or more
if ((skill.scope == 3 or skill.scope == 4) and self.hp == 0) or
((skill.scope == 5 or skill.scope == 6) and self.hp >= 1)
# End Method
return false
end
# Clear effective flag
effective = false
# Set effective flag if common ID is effective
effective |= skill.common_event_id > 0
# First hit detection
hit = skill.hit
if skill.atk_f > 0
hit *= user.hit / 100
end
hit_result = (rand(100) < hit)
# Set effective flag if skill is uncertain
effective |= hit < 100
# If hit occurs
if hit_result == true
# Calculate power
power = skill.power + user.atk * skill.atk_f / 100
if power > 0
power -= self.pdef * skill.pdef_f / 200
power -= self.mdef * skill.mdef_f / 200
power = [power, 0].max
end
# Calculate rate
rate = 20
rate += (user.str * skill.str_f / 100)
rate += (user.dex * skill.dex_f / 100)
rate += (user.agi * skill.agi_f / 100)
rate += (user.int * skill.int_f / 100)
# Calculate basic damage
self.damage = power * rate / 20
# Element correction
self.damage *= elements_correct(skill.element_set)
self.damage /= 100
# If damage value is strictly positive
if self.damage > 0
# Guard correction
if self.guarding?
self.damage /= 2
end
end
# Dispersion
if skill.variance > 0 and self.damage.abs > 0
amp = [self.damage.abs * skill.variance / 100, 1].max
self.damage += rand(amp+1) + rand(amp+1) - amp
end
# Second hit detection
eva = 8 * self.agi / user.dex + self.eva
hit = self.damage < 0 ? 100 : 100 - eva * skill.eva_f / 100
hit = self.cant_evade? ? 100 : hit
hit_result = (rand(100) < hit)
# Set effective flag if skill is uncertain
effective |= hit < 100
end
# If hit occurs
if hit_result == true
# If physical attack has power other than 0
if skill.power != 0 and skill.atk_f > 0
# State Removed by Shock
remove_states_shock
# Set to effective flag
effective = true
end
#-------------------------------------------
#If the shield has strength
if state?(PWS_ID)
if pws_hp > self.damage
last_hp = @pws_hp
# Substract damage from the shield's strength
@pws_hp -= self.damage
self.damage = "Absorb"
effective |= @pws_hp != last_hp
else
# Substract damage from HP
last_hp = @pws_hp
# Subtract shield's last strength from damage
self.damage -= @pws_hp
self.hp -= self.damage
remove_state(PWS_ID)
effective |= self.hp != last_hp
end
else
# Substract damage from HP
last_hp = self.hp
self.hp -= self.damage
effective |= self.hp != last_hp
end
#-------------------------------------------
# State change
@state_changed = false
effective |= states_plus(skill.plus_state_set)
effective |= states_minus(skill.minus_state_set)
# If power is 0
if skill.power == 0
# Set damage to an empty string
self.damage = ""
# If state is unchanged
unless @state_changed
# Set damage to "Miss"
self.damage = "Miss"
end
end
# If miss occurs
else
# Set damage to "Miss"
self.damage = "Miss"
end
# If not in battle
unless $game_temp.in_battle
# Set damage to nil
self.damage = nil
end
# End Method
return effective
end
# log the overwrite
SDK.log_overwrite(:Game_Battler, :slip_damage_effect)
#--------------------------------------------------------------------------
# * Application of Slip Damage Effects
#--------------------------------------------------------------------------
def slip_damage_effect
# Set damage
self.damage = self.maxhp / 10
# Dispersion
if self.damage.abs > 0
amp = [self.damage.abs * 15 / 100, 1].max
self.damage += rand(amp+1) + rand(amp+1) - amp
end
#-------------------------------------------
#If the shield has strength
if state?(PWS_ID)
if pws_hp > self.damage
# Substract damage from the shield's strength
@pws_hp -= self.damage
self.damage = "Absorb"
else
# Subtract shield's last strength from damage
self.damage -= @pws_hp
self.hp -= self.damage
remove_state(PWS_ID)
end
else
# Substract damage from HP
last_hp = self.hp
self.hp -= self.damage
end
#-------------------------------------------
# End Method
return true
end
end
#--------------------------------------------------------------------------
# End SDK Enabled Test
#--------------------------------------------------------------------------
end
Posts: 11,243
Threads: 650
Joined: May 2009
It has content designed for the RMXP SDK. If you're using it, you're fine. If not.... well, you're still fine. You'll just need to remove the statements that have 'SDK.' in them like
Code: if SDK.enabled?('Power Word: Shield Status Effect')
And you'll need to remove the last 'end' statement as the sample SDK line I mentioned is the start of an IF block.
Up is down, left is right and sideways is straight ahead. - Cord "Circle of Iron", 1978 (written by Bruce Lee and James Coburn... really...)
Above are clickable links
Posts: 29
Threads: 4
Joined: Dec 2019
Nice! Thank you both.
I don't use SDK, so I'm glad that you mentioned, VVulf.
I will test the script today or tomorrow and let you know about the results 
Posts: 29
Threads: 4
Joined: Dec 2019
Okay, I did some testing and the script works great by itself!
The numbers for the shield seem to add up now and the "absorbed" message is neat.
However, I have three more questions 
First of all, I would like to make at least 2 different shield skills (preferably more) with different values.
Is it possible to turn the state id and shield value into an array?
Also, if I want to use fixed values for the shield, rather than % of maxhp, is the following replacement for line 63 correct?
Code: @pws_hp = PWS_PERCENT
Finally, the following script is the only one I'm using that seems to conflict with this one.
Code: #:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=
# Full Reflection System by Blizzard
# Version: 3.01b
# Type: Game Experience Improvement
# Date: 5.9.2006
# Date v1.4: 16.1.2007
# Date v2.0b: 12.3.2007
# Date v2.1b: 13.11.2007
# Date v3.0b: 13.7.2008
# Date v3.01b: 5.12.2008
#:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=
#
# This work is protected by the following license:
# #----------------------------------------------------------------------------
# #
# # Creative Commons - Attribution-NonCommercial-ShareAlike 3.0 Unported
# # ( http://creativecommons.org/licenses/by-nc-sa/3.0/ )
# #
# # You are free:
# #
# # to Share - to copy, distribute and transmit the work
# # to Remix - to adapt the work
# #
# # Under the following conditions:
# #
# # Attribution. You must attribute the work in the manner specified by the
# # author or licensor (but not in any way that suggests that they endorse you
# # or your use of the work).
# #
# # Noncommercial. You may not use this work for commercial purposes.
# #
# # Share alike. If you alter, transform, or build upon this work, you may
# # distribute the resulting work only under the same or similar license to
# # this one.
# #
# # - For any reuse or distribution, you must make clear to others the license
# # terms of this work. The best way to do this is with a link to this web
# # page.
# #
# # - Any of the above conditions can be waived if you get permission from the
# # copyright holder.
# #
# # - Nothing in this license impairs or restricts the author's moral rights.
# #
# #----------------------------------------------------------------------------
#
#:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=
#
# new in v1.4:
# - overworked code and fixed all the glitches
# - the power comes back X times stronger if it is reflected from X battlers
# (i.e. like in the Final Fantasy series)
# - spells now get reflected to anybody from the enemy party, not only the
# user (makes it possible to split damage from the FF feature mentioned
# above)
# - added a fix so it works with HP/SP Absorb
#
# new in v2.0b:
# - completely overworked and fixed
#
# new in v2.1b:
# - overworked and independent from Tons of Add-ons
#
# new in v3.0b:
# - fixed a little bug based on HP/SP Absorb Skills
# - better coding
# - commented code
# - now compatible with Blizz-ABS 1.99 or higher
#
# new in v3.01b:
# - now compatible with Blizz-ABS 2.11 or higher
#
#
# Compatibility:
#
# 97% compatible with SDK v1.x. 80% compatible with SDK v2.x. You might
# experience problems with exotic CBS-es.
#
#
# Configuration:
#
# Make a status effect and call it "Reflect". Remember the ID number. Now
# make an animation that should be displayed when reflecting magic.
#
# REFLECT_ID - the ID of the reflect status
# REFLECT_ANIMATION - the ID of animation displayed when magic is being
# reflecting
# BREAK_REFLECT - IDs of skills that go through Reflection no matter
# what
# MISS_DAMAGE - what is displayed in your game if somebody gets
# missed (usually 'Miss')
#
# Notes:
#
# A magical skill is considered a skill that has a either INT-F greater than
# zero or MDEF-F greater than zero. Please note that skills that can disable
# the reflection status break through the reflection automatically. Also, it
# is better if you don't use sounds and screen/target flashing in the
# animation for the reflecting effect.
#
#
# If you find any bugs, please report them here:
# http://forum.chaos-project.com
#:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=
$full_reflection_system = 3.01
#==============================================================================
# module BlizzCFG
#==============================================================================
module BlizzCFG
#::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
# START COnfiguration
#::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
REFLECT_ID = 68
REFLECT_ANIMATION = 61
BREAK_REFLECT = [145, 147]
MISS_DAMAGE = 'Miss'
#::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
# END COnfiguration
#::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
#----------------------------------------------------------------------------
# reflection_effect
# battler - battler using the skill
# targets - targeted battlers
# skill - the skill being used
# Executes complete replacement processing of targeted battlers when
# reflecting.
#----------------------------------------------------------------------------
def self.reflection_effect(battler, targets, skill)
# old targets
old_targets = []
# for each target
targets.each_index {|i|
# if skill exists, using skill and target reflects
if skill != nil && battler.current_action.kind == 1 &&
targets[i].test_reflection(skill)
# swap the targtet with a new one
new_target = self.swap_target(battler, targets[i], skill)
# if the new target is different from the one before
if targets[i] != new_target
# remember old target
old_targets.push(targets[i])
# set new target
targets[i] = new_target
end
end}
# remove nils
targets.compact!
# for each target
targets.each {|target|
# get damage
dam = (target.damage.is_a?(Numeric) ? target.damage : 0)
# execute skill and override reflection
target.skill_effect(battler, skill, true)
# add damage if already damaged
target.damage += dam if target.damage.is_a?(Numeric)
# set hit animation if not missed
target.animation_hit = (target.damage != MISS_DAMAGE)}
# return old targets
return old_targets
end
#----------------------------------------------------------------------------
# swap_target
# b1 - battler using skill
# b2 - battler being attacked
# skill - the skill being used
# Swaps the targeted battler with another one so a reflection effect is
# achieved.
#----------------------------------------------------------------------------
def self.swap_target(b1, b2, skill)
# if enemy is targeted
if b2.is_a?(Game_Enemy)
# get valid actor targets
bs = $game_party.actors.find_all {|actor| actor.exist?}
# if actor is targeted
elsif b2.is_a?(Game_Actor)
# get valid enemy targets
bs = $game_troop.enemies.find_all {|enemy| enemy.exist?}
else
# target doesn't change
bs = [b2]
end
# return a random target of all possible targets
return bs[rand(bs.size)]
end
#----------------------------------------------------------------------------
# reflection_effect_blizzabs
# battler - battler using the skill
# targets - targeted battlers
# other - alternative targets
# skill - the skill being used
# Replaces all battlers that have reflection with other battlers.
#----------------------------------------------------------------------------
def self.reflection_effect_blizzabs(battler, targets, other, skill)
# old targets
old_targets = []
# for each target
targets.each_index {|i|
# if skill exists, using skill and target reflects
if skill != nil && targets[i].battler.test_reflection(skill)
# swap the target with a new one
new_target = self.swap_target_blizzabs(battler, targets[i], other, skill)
# if the new target is different from the one before
if targets[i] != new_target
# remember old target
old_targets.push(targets[i])
# set new target
targets[i] = new_target
end
end}
# if animations are being used
if BlizzABS::Config::ANIMATIONS
# set animation to reflecting for all old targets
old_targets.each {|target| target.animation_id = REFLECT_ANIMATION}
end
end
#----------------------------------------------------------------------------
# swap_target_blizzabs
# b1 - battler using skill
# b2 - battler being attacked
# other - alternative targets
# skill - the skill being used
# Swaps the targeted map battler with another one so a reflection effect is
# achieved.
#----------------------------------------------------------------------------
def self.swap_target_blizzabs(b1, b2, other, skill)
# find all targets that are negative aligned from the targeted battler
bs = other.find_all {|b| b2.ai.negative.include?(b.ai.basic)}
# set original target if no other targets exist
bs = [b2] if bs.size == 0
# return a random target of all possible targets
return bs[rand(bs.size)]
end
end
#==============================================================================
# Game_Battler
#==============================================================================
class Game_Battler
#----------------------------------------------------------------------------
# override skill_effect
#----------------------------------------------------------------------------
alias skill_effect_reflect_later skill_effect
def skill_effect(user, skill, override_reflect = !$scene.is_a?(Scene_Battle))
# if in Blizz-ABS mode on the map
if $BlizzABS && BlizzABS::VERSION >= 1.99 && $scene.is_a?(Scene_Map)
# set reflect inactive
override_reflect = true
end
# if reflect is not active
if override_reflect || !test_reflection(skill)
# execute skill
return skill_effect_reflect_later(user, skill)
end
# not skill execution
return false
end
#----------------------------------------------------------------------------
# test_reflection
# skill - the skill to be check
# Checks whether a skill should be reflected.
#----------------------------------------------------------------------------
def test_reflection(skill)
return ((skill.int_f > 0 || skill.mdef_f > 0) &&
@states.include?(BlizzCFG::REFLECT_ID) &&
!BlizzCFG::BREAK_REFLECT.include?(skill.id) &&
!skill.minus_state_set.include?(BlizzCFG::REFLECT_ID))
end
end
#==============================================================================
# Scene_Battle
#==============================================================================
class Scene_Battle
#----------------------------------------------------------------------------
# override main
#----------------------------------------------------------------------------
alias main_reflect_later main
def main
# initialize array of old targets
@old_targets = []
# call original method
main_reflect_later
end
#----------------------------------------------------------------------------
# override set_target_battlers
#----------------------------------------------------------------------------
alias set_target_battlers_reflect_later set_target_battlers
def set_target_battlers(scope, battler = nil, override = false)
# if skill can't break through reflection this time
if !BlizzCFG::BREAK_REFLECT.include?(@skill.id) && !override &&
@active_battler.current_action.kind == 1
# no targets
return []
end
# if RTAB is not installed
if battler == nil
# call original method
return set_target_battlers_reflect_later(scope)
else
# call original method with RTAB compatibility
return set_target_battlers_reflect_later(scope, battler)
end
end
#----------------------------------------------------------------------------
# override make_skill_action_result
#----------------------------------------------------------------------------
alias make_skill_action_result_reflect_later make_skill_action_result
def make_skill_action_result(battler = nil, plus_id = nil)
# if RTAB is not installed
if battler == nil
# call original method
make_skill_action_result_reflect_later
# set battler and targets
tmp, targets = @active_battler, @target_battlers
# additional compatibility
elsif plus_id == nil
# call original method with RTAB compatibility
make_skill_action_result_reflect_later(battler)
# set targets
targets = battler.target
else
# call original method with higher RTAB compatibility
make_skill_action_result_reflect_later(battler, plus_id)
# set targets
targets = battler.target
end
# if not breaking reflection skill
unless BlizzCFG::BREAK_REFLECT.include?(@skill.id)
# set targets allowing reflection
set_target_battlers(@skill.scope, battler, true)
# set battler if doesn't exist
battler = tmp if battler == nil && tmp != nil
# execute reflection effect and get old targets
@old_targets = BlizzCFG.reflection_effect(battler, targets, @skill)
end
end
#----------------------------------------------------------------------------
# override make_skill_action_result
#----------------------------------------------------------------------------
alias update_phase4_step4_reflect_later update_phase4_step4
def update_phase4_step4(battler = nil)
# change animation to reflecting for all old targets
@old_targets.each {|target|
target.animation_id = BlizzCFG::REFLECT_ANIMATION}
# empty old targets
@old_targets = []
# if RTAB not installed
if battler == nil
# call original method
update_phase4_step4_reflect_later
else
# call original method with RTAB compatibility
update_phase4_step4_reflect_later(battler)
end
end
end
I am getting the error "wrong number of arguments (3 for 2)" in this part of the Reflection script:
Code: # for each target
targets.each {|target|
# get damage
dam = (target.damage.is_a?(Numeric) ? target.damage : 0)
# execute skill and override reflection
target.skill_effect(battler, skill, true) # This line <------
# add damage if already damaged
target.damage += dam if target.damage.is_a?(Numeric)
# set hit animation if not missed
target.animation_hit = (target.damage != MISS_DAMAGE)}
Is this easily fixable? If not, I will use the PWS script over the reflection one.
Posts: 11,243
Threads: 650
Joined: May 2009
12-20-2019, 04:42 AM
(This post was last modified: 12-20-2019, 05:15 AM by DerVVulfman.)
To fix your 'compatability' issue between it and Blizzard's script, allow moi to go about a little teaching. 
There are two ways to add new material to a method in Ruby Scripting. You either rewrite the whole method or you use the 'alias' technique which allows you to append new material without the need of rewriting the whole method.
The first method, the one where you rewrite a method, is destructive. For example, if you have two scripts that alter the 'attack_battler' method, and the last script in your list rewrites the method.... erm, all the prior ones are overwritten and ignored. A rewrite of the method is not preferred, but sometimes it is the only way to achieve what is desired.
The second method, the one using the alias techinique, is additive. For example, if you have two scripts that alter the 'attack_battler' method, and the last script in your list aliases new content.... Well, that material from the previous script is still present and the new aliased content joins it! It is more preferred, but can be prone to crashing if the script's author didn't take stack overflow into consideration. A rarity, but certain authors do ignore it.
NOW.... About the two scripts.
The one that Melana supplied rewrites the 'attack_effect' and 'skill_effect' methods as well as the 'slip_damage_effect' method. You can find these in the original code just by looking for the 'SDK.overwrite' statements. So this uses the first method of scripting, the rewrite method technique.
The second one, the one by blizzard, uses the alias technique upon the 'skill_effect' method. This is the more preferred technique and should be placed after the first. In fact, if you have any other script that alters 'skill_effect', this script should be last in the list. Why? Because blizzard added extra parameters into his 'skill_effect' call.
Normally, the skill_effect looks like this:
def skill_effect(user, skill)
Blizzard's variation looks like this:
def skill_effect(user, skill, override_reflect = !$scene.is_a?(Scene_Battle))
He added a new 'override_reflect' parameter that changes how things work. And any other script that aliases 'skill_effect' and gets posted after this will have the "wrong number of arguments (3 for 2)" error.
And I take it that your edit is to this?
Code: if state_id == PWS_ID
@pws_hp = Integer(self.maxhp * PWS_PERCENT)
end
So... PWS_PERCENT will then be a fixed value for all shields or whatever it is. Sounds right, but I haven't examined the script. I'm just looking at it while working on forum stuff. 
Up is down, left is right and sideways is straight ahead. - Cord "Circle of Iron", 1978 (written by Bruce Lee and James Coburn... really...)
Above are clickable links
Posts: 29
Threads: 4
Joined: Dec 2019
12-22-2019, 01:03 AM
(This post was last modified: 12-22-2019, 01:03 AM by Fenriswolf.)
Thanks for the explanation. When I put the PWS script in front of Blizzard's, there seems to be no problem.
Now it need to figure out if all my other combat add-on scripts are compatible.
Then I will try and (hopefully) adjust the script for it to manage multiple state id's.
But first, some sleep.
Posts: 29
Threads: 4
Joined: Dec 2019
12-27-2019, 11:27 PM
(This post was last modified: 12-27-2019, 11:28 PM by Fenriswolf.)
Alright. I finished testing my combat add-on scripts for compatibility.
I had to fix some bugs (which weren't even compatibility related) and it seems that the scripts I am using are not in conflict with each other.
Most likely I won't add any more scripts other than the ones I have now, so I can finally focus on database, mapping, eventing, etc.
Anyway, I am still looking for someone who can help me with my earlier request:
Editing the PWS script so that I can use multiple shields / state id's.
Like I said before; I am willing to pay if a lot of effort is involved.
|
Bubble shield
![[Image: QrnbKlx.jpg]](https://i.imgur.com/QrnbKlx.jpg)
![[Image: sGz1ErF.png]](https://i.imgur.com/sGz1ErF.png)
![[Image: liM4ikn.png]](https://i.imgur.com/liM4ikn.png)
![[Image: fdzKgZA.png]](https://i.imgur.com/fdzKgZA.png)
![[Image: sj0H81z.png]](https://i.imgur.com/sj0H81z.png)
![[Image: QL7oRau.png]](https://i.imgur.com/QL7oRau.png)
![[Image: uSqjY09.png]](https://i.imgur.com/uSqjY09.png)
![[Image: GAA3qE9.png]](https://i.imgur.com/GAA3qE9.png)
![[Image: 2Hmnx1G.png]](https://i.imgur.com/2Hmnx1G.png)
![[Image: BwtNdKw.png%5B]](https://i.imgur.com/BwtNdKw.png%5B)