Login

***DerVVulfman*** · (This post was last modified: 10-08-2024, 02:13 PM by DerVVulfman.)

Collateral Attacks

Version: 1

Introduction

This system is designed to allow an attack to apply damage to one (or more) additional targets. The targets may be random, all encompassing, or fixed to the same principle target attacked. Likewise, the secondary strikes may be limited to random chance, or require that the initial attack succeed.

And then there's an option whereby the secondary strikes are at half damage.

This script was inspired by Bennerdeben of Save-Point who requested advice on how to generate additional random strikes for a given attack.

Script

Content Hidden

Code:
#==============================================================================

# ** Collateral Attacks

#------------------------------------------------------------------------------

#    version 1.0

#    by DerVVulfman

#    07-15-2020 (MM-DD-YYYY)

#    RGSS / RPGMaker XP

#==============================================================================

#

#  INTRODUCTION:

#

#  This system is designed to allow an attack  to apply damage to one (or more)

#  additional targets. The targets may be random, all encompassing, or fixed to

#  the same principle target attacked.  Likewise,  the secondary strikes may be

#  limited to random chance, or require that the initial attack succeed.

#

#  And then there's an option whereby the secondary strikes are at half damage.

#

#  This script was inspired  by Bennerdeben of Save-Point  who requested advice

#  on how to generate additional random strikes for a given attack.

#

#

#------------------------------------------------------------------------------

#

#  INSTALLATION:

#

#  Place this script  below Scene_Debug and above Main.  And place it below any

#  script that alters any battlesystem script.

#

#  If you want to use the 'half' collateral damage option,  small edits need to

#  be made to your Game_Battler code (described further below)

#

#

#------------------------------------------------------------------------------

#

#  USAGE:

#

#  Collateral attacks are essentially a secondary strike against  another enemy

#  target.  However,  it can also be a secondary bonus given to a fellow member

#  of the party  if the initial target  was an ally.  The script does recognize

#  target scopes.  And target scopes 1 (one enemy) and 2 (all enemies)  are the

#  only ones that perform collateral strikes on enemy troops.  Surprise!

#

#  Within the Collateral module,  you can define if a collateral strike is per-

#  formed when using a defined WEAPON, SKILL or an ITEM. And collateral strikes

#  of a melee sort may be performed  by a defined ACTOR or ENEMY in general. Do

#  know that an actor defined to deliver collateral strikes of one variety will

#  be subject to the collateral strikes of weapons, skills or items if defined.

#

#  Example:  Margie is set to deliver a 2nd strike on all targets, but is using

#            a sword defined to deliver a 2nd strike on one victim. The sword's

#            collateral attack supercedes the one defined for Margie.

#

#  Note:    ENEMY collateral strikes are melee only.  Enemies using skills do

#            not deliver skill collateral strikes unless the skill is defined.

#

#                                *    *    *

#  

#  When you define a Skill, Item or the like that delivers a collateral attack,

#  you reference said content by its ID within their related database. By that,

#  you would refer to the default 'Greater Thunder' as ID #17 within the Skills

#  database.

#

#  EX:  SKILL[17]

#

#  Each of the defined collateral attack objects  is defined the same way, only

#  differing between which database they belong.  Likewise, each collateral at-

#  tack object is assigned an array with one(1) to four(4) parameters. The syn-

#  tax for any object and the paramters are as follows:

#

#  EX:  Object[ID] = [ Type, Chance, Must-Hit, Halved ]

#

#    * Object:  Defined array of ACTOR, ENEMY, WEAPON, SKILL, ITEM

#    * ID:      Database ID for a given collateral attack Object

#

#    * Type:    Type of collateral attack responce

#    * Chance:  (Optional) The chance that a collateral attack will occur

#    * Must-Hit: (Optional) Defines if the initial strike must succeed

#    * Halved:  (Optional) Defines if collateral strikes give half-damage

#

#  * Type

#    ----

#    The type of collateral attack relates to who is attacked after the initial

#    strike. It can be the same target(s), or all others of the party. You have

#    four options shown below:

#          0 = Identical target(s) as the initial attack

#          1 = One random target separate from initial attack

#          2 = All targets other than those of the initial attack

#          3 = All targets 

#

#  * Chance

#    ------

#    (Optional)  This determines the chance of a collateral attack taking place

#    in a range of (0-100). Granted, defining a 0 chance makes no sense. If the

#    value is left out, the default chance is 100 (ergo 100%).

#

#    If you have values (Must-Hit and/or Halved) defined, the chance value must

#    be defined.

#

#  * Must-Hit

#    --------

#    (Optional)  This is a boolean (or true/false) value that indicates  if the

#    initial attack must succeed to go any further. If it is set to false, even

#    a 'miss' will trigger collateral damage. But if set to true, then the ini-

#    tial attack must succeed. Please be aware that changes to a target's state

#    does count as a hit.  And if the must-hit value  is left out,  the default

#    setting assumes 'false' and allows collateral strikes even after a miss.

#

#    If you have a Halved value defined, the Must-Hit value must also be set.

#

#  * Halved

#    ------

#    (Optional)  This is a boolean (or true/false) value that indicates  if the

#    damage resulting  from a collateral attack  would only be  half of what it

#    it would normally have been. Damage is individually calculated before this

#    option takes place. And if the Halved value is left out, the default value

#    for this setting is 'false' and assumes full damage.

#  

#    For this option to function, you must apply edits to Game_Battler itself.

#

#

#------------------------------------------------------------------------------

#

#  HALVED-DAMAGE - DIRECT EDITS INTO GAME_BATTLER:

#

#  Most every method within RPGMaker XP  are small and concise.  Sadly, some of

#  the methods are large.  And inserting code to affect how certain factors are

#  calculated cannot be performed without direct edits or full-blown rewrites.

#

#  And among these methods,  the 'effect' calculations within Game_Battler fall

#  into that category. Fortunately, the edits to be described are very rudimen-

#  tary and small.

#

#  Edits for melee damage

#  ----------------------

#  

#  To allow collateral damage to be halved with regard to melee damage,  you'll

#  need to examine the 'attack_effect' script in "Game_Battler 3". Once you get

#  past line 71 of the 'dispersion' effect (where it adds random values and bo-

#  nuses), you will add the following lines:

#

#      if attacker.collateral_performed

#        if attacker.collateral_halved

#          self.damage /= 2

#        end

#      end  

#

#  Ergo, it should appear like this in your default 'attack_effect" method:

#

#      .  .  .  .  .

#      # Dispersion

#      if self.damage.abs > 0

#        amp = [self.damage.abs * 15 / 100, 1].max

#        self.damage += rand(amp+1) + rand(amp+1) - amp

#      end

#      if attacker.collateral_performed

#        if attacker.collateral_halved

#          self.damage /= 2

#        end

#      end      

#      # Second hit detection

#      eva = 8 * self.agi / attacker.dex + self.eva

#      .  .  .  .  .

#

#  I would suggest adding extra comments around the addition so it can be found

#  if the need arises.

#

#

#  Edits for skill damage

#  ----------------------

#  

#  To allow collateral damage to be halved with regard to skill damage,  you'll

#  need to examine the 'skill_effect' script in "Game_Battler 3".  Once you get

#  past line 156 of the  'dispersion' effect  (where it adds bonuses and random

#  values), you will add the following lines:

#

#      if user.collateral_performed

#        if user.collateral_halved

#          self.damage /= 2

#        end

#      end  

#

#  Ergo, it should appear like this in your default 'skill_effect" method:

#

#      .  .  .  .  .

#      # Dispersion

#      if skill.variance > 0 and self.damage.abs > 0

#        amp = [self.damage.abs * skill.variance / 100, 1].max

#        self.damage += rand(amp+1) + rand(amp+1) - amp

#      end

#      if user.collateral_performed

#        if user.collateral_halved

#          self.damage /= 2

#        end

#      end  

#      # Second hit detection

#      eva = 8 * self.agi / user.dex + self.eva

#      .  .  .  .  .

#

#  The edit doesn't look much different  than the edit for melee attacks,  with

#  'user' being given rather than 'attacker'.  Do realize the line number given

#  is based on an unedited version of Game_Battler 3.

#

#  I would suggest adding extra comments around the addition so it can be found

#  if the need arises.

#

#

#  Edits for item damage

#  ---------------------

#  

#  To allow collateral damage to be halved with regard to item damage, you will

#  need to examine the 'item_effect' script in "Game_Battler 3".  Just like the

#  other edits, it can be placed after the 'dispersion' effect. But it may look

#  cleaner for the below edit  to be placed after line 257  of Game_Battler 3's 

#  'negative recovery' test:

#

#      if item.collateral_halved

#        recover_hp /= 2

#        recover_sp /= 2

#      end

#

#  Ergo, it should appear like this in your default 'item_effect" method:

#

#      .  .  .  .  .

#      # If recovery code is negative

#      if recover_hp < 0

#        # Guard correction

#        if self.guarding?

#          recover_hp /= 2

#        end

#      end

#      if item.collateral_halved

#        recover_hp /= 2

#        recover_sp /= 2

#      end

#      # Set damage value and reverse HP recovery amount

#      self.damage = -recover_hp

#      .  .  .  .  .

#

#  This edit is slightly different as items allow for the recovery of damage to

#  SP as well as HP scores.  And the condition being checked is if the item has

#  a collateral_halved flag set to true. Item damage resulting from RPGMaker XP

#  is not attributed  to any one actor,  so an addition was made  to the innate

#  RPG::Item class itself, adding this flag.

#

#  And again, I would suggest adding extra comments for tracking purposes.

#

#

#------------------------------------------------------------------------------

#

#  COMPATIBILITY:

#

#  Fairly compatible for RPGMaker XP systems other than the optional direct

#  edits described. However, said edits are not necessary IF you choose not

#  to employ half-damage from collateral strikes.

#

#

#==============================================================================

#

#  TERMS AND CONDITIONS:

#

#  Free to use, even in commercial projects.  However, I will need some form

#  of due credit for both myself and Bennerdeben...  even if but a mere men-

#  tion in some end titles.

#

#==============================================================================

module Collateral

  #--------------------------------------------------------------------------

  ENEMY, ACTOR, WEAPON, SKILL, ITEM = {}, {}, {}, {}, {}  # DO NOT TOUCH

  #--------------------------------------------------------------------------

  #--------------------------------------------------------------------------

  # TYPE:

  # 0 = Identical target(s) as the initial attack

  # 1 = One random target separate from initial attack

  # 2 = All targets other than those of the initial attack

  # 3 = All targets 

  #--------------------------------------------------------------------------

  # ENEMIES

  # ------------------------------------------

  #      ID    Type  Chance  Must Hit  Halved

  #========    ====  ======  ========  ======

  ENEMY[1]  = [  1,  100,    true]              # Ghost do 2nd atk on good hit

  # ACTORS

  # ------------------------------------------

  #      ID    Type  Chance  Must Hit  Halved

  #========    ====  ======  ========  ======

  ACTOR[7]  = [  0,    99,    false,    true  ]  # Gloria gets 2nd hit at 1/2

  # WEAPONS

  # ------------------------------------------

  #      ID    Type  Chance  Must Hit  Halved

  #========    ====  ======  ========  ======

  WEAPON[1] = [  0  ]                            # Sword1 gets 2nd hit    

  WEAPON[2] = [  0,    50 ]                      # Sword2 has 50% for 2nd hit

  # SKILLS

  # ------------------------------------------

  #      ID    Type  Chance  Must Hit  Halved

  #========    ====  ======  ========  ======

  SKILL[1]  = [  3,    50,    true,    true  ]  # Heal all 50% chance at 1/2

  SKILL[57] = [  1,    99,    false,    true  ]  # CrossCut hits another halved

  SKILL[58] = [  2,    99,    false,    false ]  # Feint hits all others

  # ITEMS

  # ------------------------------------------

  #      ID    Type  Chance  Must Hit  Halved

  #========    ====  ======  ========  ======

  ITEM[8]  = [  3,    50,    false,    true  ]  # 50% heal others at 1/2 power

  ITEM[11]  = [  2,    100,    false ]            # Antidote works on all others

end

#==============================================================================

# ** Game_Battler

#------------------------------------------------------------------------------

#  This class deals with battlers. It's used as a superclass for the Game_Actor

#  and Game_Enemy classes.

#==============================================================================

class Game_Battler

  #--------------------------------------------------------------------------

  # * Alias Listings

  #--------------------------------------------------------------------------

  alias collateral_initialize initialize

  #--------------------------------------------------------------------------

  # * Public Instance Variables

  #--------------------------------------------------------------------------

  attr_reader  :state_changed            # State changed

  attr_accessor :collateral_flag          # Collateral damage flag

  attr_accessor :collateral_type          # Collateral responce type

  attr_accessor :collateral_hit          # Collateral must hit flag

  attr_accessor :collateral_halved        # Collateral damage halved

  attr_accessor :collateral_performed    # Collateral prevent looping

  attr_accessor :collateral_missed        # Collateral damage prevented

  #--------------------------------------------------------------------------

  # * Object Initialization

  #--------------------------------------------------------------------------

  def initialize

    #

    # Perform the original method

    collateral_initialize

    #

    # New flags in play

    @collateral_flag      = false

    @collateral_type      = 0

    @collateral_hit      = false

    @collateral_halved    = false

    @collateral_performed = false

    @collateral_missed    = false

    #

  end

end

#==============================================================================

# ** RPG::Item

#------------------------------------------------------------------------------

#  This class contains the RPGXP data structure for items.

#==============================================================================

class RPG::Item

  #--------------------------------------------------------------------------

  # * Alias Listings

  #--------------------------------------------------------------------------

  alias collateral_rpg_item_initialize initialize

  #--------------------------------------------------------------------------

  # * Object Initialization

  #--------------------------------------------------------------------------

  attr_accessor :collateral_halved        # Collateral damage halved

  #--------------------------------------------------------------------------

  # * Object Initialization

  #--------------------------------------------------------------------------

  def initialize

    #

    # Perform the original method

    collateral_rpg_item_initialize

    #

    # New flags in play

    @collateral_halved = false

    #

  end

end

#==============================================================================

# ** Scene_Battle

#------------------------------------------------------------------------------

#  This class performs battle screen processing.

#==============================================================================

class Scene_Battle

  #--------------------------------------------------------------------------

  # * Alias Listings

  #--------------------------------------------------------------------------

  alias collateral_update_phase4_step2 update_phase4_step2

  alias collateral_make_basic_action_result make_basic_action_result

  alias collateral_make_skill_action_result make_skill_action_result

  alias collateral_make_item_action_result make_item_action_result

  alias collateral_update_phase4_step3 update_phase4_step3

  alias collateral_update_phase4_step6 update_phase4_step6

  #--------------------------------------------------------------------------

  # * Frame Update (main phase step 2 : start action)

  #--------------------------------------------------------------------------

  def update_phase4_step2

    #

    @active_battler.collateral_flag        = false  # Clear the flags

    @active_battler.collateral_type        = 0      # at battle attack start

    @active_battler.collateral_hit          = false

    @active_battler.collateral_halved      = false

    @active_battler.collateral_performed    = false

    @active_battler.collateral_missed      = false

    #

    collateral_update_phase4_step2                    # Perform the original

    #

  end

  #--------------------------------------------------------------------------

  # * Make Basic Action Results

  #--------------------------------------------------------------------------

  def make_basic_action_result

    #

    unless @active_battler.collateral_performed      # Only if not performed

      if @active_battler.is_a?(Game_Actor)            # If Actor attacker

        if @active_battler.current_action.basic == 0  # Only if melee attack

          id = @active_battler.id                    # Get the enemy ID

          collateral_result(Collateral::ACTOR, id)    # Generate damage Result

          id = @active_battler.weapon_id              # Get the weapon ID

          if Collateral::WEAPON.has_key?(id)          # If valid for collateral

            collateral_result(Collateral::WEAPON, id) # Generate damage result

          end

        end

      else                                            # Else if Enemy attacker

        id = @active_battler.id                      # Get the enemy ID

        collateral_result(Collateral::ENEMY, id)      # Generate damage result

      end

    end

    #

    collateral_make_basic_action_result              # Perform the original

    missed_collateral_action_result                  # Get if attack missed

    #

  end

  #--------------------------------------------------------------------------

  # * Make Skill Action Results

  #--------------------------------------------------------------------------

  def make_skill_action_result

    #

    unless @active_battler.collateral_performed      # Only if not performed

      id = @active_battler.current_action.skill_id    # Get the Item ID

      collateral_result(Collateral::SKILL, id)        # Generate damage result

    end

    #

    collateral_make_skill_action_result              # Perform the original

    missed_collateral_action_result                  # Get if attack missed

    #

  end

  #--------------------------------------------------------------------------

  # * Make Item Action Results

  #--------------------------------------------------------------------------

  def make_item_action_result

    #

    id = @active_battler.current_action.item_id      # Get the Item ID

    @item = $data_items[id]                          # Get the item

    @item.collateral_halved = false                  # Clear halved stat

    #

    unless @active_battler.collateral_performed      # Only if not performed

      id = @active_battler.current_action.item_id    # Get the Item ID

      collateral_result(Collateral::ITEM, id)        # Generate damage result

    end

    #

    collateral_make_item_action_result                # Perform the original

    missed_collateral_action_result                  # Get if attack missed

    #

  end

  #--------------------------------------------------------------------------

  # * Make Skill Action Results

  #--------------------------------------------------------------------------

  def missed_collateral_action_result

    #

    effective = false                                # Assume no damage

    for target in @target_battlers                    # Cycle all targets

      unless target.state_changed == true            # if not status applying

        next if target.damage.nil?                    # Skip any nil damage

        next if (target.damage).to_i == 0            # Skip any non-numeric

      end

      effective = true                                # Found actual damage

      break                                          # Break out of cycle

    end

    #

    @active_battler.collateral_missed = !effective    # Set flag missed

    #

  end

  #--------------------------------------------------------------------------

  # * Make Collateral Action Result

  #    array_list : configured list of collateral tagged attacks

  #    id        : attack ID

  #--------------------------------------------------------------------------

  def collateral_result(array_list, id)

    #

    return unless array_list.has_key?(id)            # Exit if not in list

    #

    responce  = array_list[id][0]                    # Get response type

    chance    = array_list[id][1]                    # Get chance of response

    must_hit  = array_list[id][2]                    # Get chance of response

    halved    = array_list[id][3]                    # Get if damage halved

    #

    chance    = 100  if chance.nil?                  # Chance default is 100

    must_hit  = false if must_hit.nil?                # Hit default is false

    halved    = false if halved.nil?                  # Halved default is false

    #

    roll = rand(100)                                  # Generate percent chance

    return if chance < roll                          # Exit if chance fails

    #

    @active_battler.collateral_flag  = true          # Set collateral flag

    @active_battler.collateral_hit    = must_hit

    @active_battler.collateral_halved = halved        # Set if damage is halved

    @active_battler.collateral_type  = responce      # Set collateral responce

    #

  end

  #--------------------------------------------------------------------------

  # * Frame Update (main phase step 3 : animation for action performer)

  #--------------------------------------------------------------------------

  def update_phase4_step3

    #

    if @active_battler.collateral_performed == true  # If performed collateral

      @phase4_step = 4                                # Shift to phase 4

      return                                          # Exit method

    end

    #

    collateral_update_phase4_step3                    # Perform the original

    #

  end

  #--------------------------------------------------------------------------

  # * Frame Update (main phase step 6 : refresh)

  #--------------------------------------------------------------------------

  def update_phase4_step6

    #

    if @active_battler.collateral_flag == true        # If collateral flag

      @target_battlers = collateral_gather            # Get collateral targets

    end

    #

    @target_battlers.compact!                        # Remove Nil entries

    #

    if @active_battler.collateral_flag == true        # If collateral flag

      if @target_battlers != []                      # If valid targets  

        collateral_action                            # Perform action

        @phase4_step = 3                              # Shift to step 3

        return                                        # Exit method

      end

    end

    #

    @active_battler.collateral_flag = false          # Clear Flag

    #

    collateral_update_phase4_step6                    # Perform the original

    #

  end

  #--------------------------------------------------------------------------

  # * Frame Update (main phase gather collateral targets)

  #--------------------------------------------------------------------------

  def collateral_gather

    #

    # Return empty array if must hit target and missed

    if @active_battler.collateral_hit

      return [] if @active_battler.collateral_missed

    end

    #

    # Determine target of collateral based on active battler's action scope

    targets_are_enemies  = collateral_gather_scope

    target_group          = collateral_gather_group(targets_are_enemies)

    #

    # Make temp copy of all previous battlers targeted

    old_battlers = @target_battlers

    #

    # Branch on collateral response type

    case @active_battler.collateral_type

    when 0 ; battler_return = collateral_gather_identical(target_group)

    when 1 ; battler_return = collateral_gather_other(target_group)

    when 2 ; battler_return = collateral_gather_all_other(target_group)

    when 3 ; battler_return = collateral_gather_all(target_group)

    end

    #

    # Exit with return array

    return battler_return

    #

  end

  #--------------------------------------------------------------------------

  # * Frame Update (main phase gather collateral targets : get attack scope)

  #--------------------------------------------------------------------------

  def collateral_gather_scope

    #

    # Branch according to each action

    case @active_battler.current_action.kind

    when 2 ; return (@item.scope == 1  || @item.scope == 2)    # Items

    when 1 ; return (@skill.scope == 1 || @skill.scope == 2)    # Skill

    end    

    #

    # Exit method true (assume Basic)

    return true

    #

  end

  #--------------------------------------------------------------------------

  # * Frame Update (main phase gather collateral targets : get target group)

  #    enemy_targets : if targets are battler's enemies or allies

  #--------------------------------------------------------------------------

  def collateral_gather_group(enemy_targets=true)

    #

    # If action battler is actor

    if @active_battler.is_a?(Game_Actor)        

      # group is 'troop' if true, otherwise group is 'party'

      group = (enemy_targets) ? $game_troop.enemies : $game_party.actors

    else

      # group is 'party' if true, otherwise group is 'troop'

      group = (enemy_targets) ?  $game_party.actors : $game_troop.enemies

    end

    #

    # Return group member list

    return group

    #

  end

  #--------------------------------------------------------------------------

  # * Frame Update (main phase gather collateral targets: all identical)

  #    group : party or troop member list

  #--------------------------------------------------------------------------

  def collateral_gather_identical(group)

    #

    battler_return  = []                              # Make returning array

    old_battlers    = @target_battlers                # Copy old targets

    #

    for target in group                              # Cycle through group

      if old_battlers.include?(target)                # If previously targeted

        battler_return.push(target) if target.exist?  # Add if valid target

      end

    end

    #

    return battler_return                            # Exit with return array

    #

  end

  #--------------------------------------------------------------------------

  # * Frame Update (main phase gather collateral targets: random other)

  #    group : party or troop member list

  #--------------------------------------------------------------------------

  def collateral_gather_other(group)

    #

    target_list    = []                              # Make temp array

    battler_return  = []                              # Make returning array

    old_battlers    = @target_battlers                # Copy old targets

    #

    for target in group                              # Cycle through group

      next if old_battlers.include?(target)          # Skip if it was targeted

      target_list.push(target) if target.exist?      # Add to list if valid

    end

    #

    id  = rand(target_list.size)                      # Choose target in list

    new_target = target_list[id]                      # Acquire target from ID

    battler_return.push(new_target)                  # Add valid target

    #

    return battler_return                            # Exit with return array

    #

  end

  #--------------------------------------------------------------------------

  # * Frame Update (main phase gather collateral targets: all other targets)

  #    group : party or troop member list

  #--------------------------------------------------------------------------

  def collateral_gather_all_other(group)

    #

    battler_return  = []                              # Make returning array

    old_battlers    = @target_battlers                # Copy old targets

    #

    for target in group                              # Cycle through group

      next if old_battlers.include?(target)          # Skip if it was targeted

      battler_return.push(target) if target.exist?    # Add if valid target

    end

    #

    return battler_return                            # Exit with return array

    #

  end

  #--------------------------------------------------------------------------

  # * Frame Update (main phase gather collateral targets: all targets)

  #    group : party or troop member list

  #--------------------------------------------------------------------------

  def collateral_gather_all(group)

    #

    battler_return  = []                              # Make returning array

    #

    for target in group                              # Cycle through group

      battler_return.push(target) if target.exist?    # Add if valid target

    end

    #

    return battler_return                            # Exit with return array

    #

  end

  #--------------------------------------------------------------------------

  # * Frame Update (main phase collateral action)

  #--------------------------------------------------------------------------

  def collateral_action

    #

    @active_battler.collateral_performed = true      # Set action performed

    @active_battler.collateral_flag = false          # Clear the old flag

    @status_window.refresh                            # Refresh status window

    #

    case @active_battler.current_action.kind          # Branch on action

    when 0 ; collateral_action_melee                  # basic

    when 1 ; collateral_action_skill                  # skill

    when 2 ; collateral_action_item                  # item

    end

    #

  end

  #--------------------------------------------------------------------------

  # * Frame Update (main phase collateral action : melee attack)

  #--------------------------------------------------------------------------

  def collateral_action_melee

    #

    @animation1_id = @active_battler.animation1_id    # Set attacker animation

    @animation2_id = @active_battler.animation2_id    # Set target animation

    #

    for target in @target_battlers                    # Cycle through targets

      next if target.nil?                            # Skip any invalid

      target.attack_effect(@active_battler)          # Apply melee result

    end

    #

  end

  #--------------------------------------------------------------------------

  # * Frame Update (main phase collateral action : skill attack)

  #--------------------------------------------------------------------------

  def collateral_action_skill

    #

    @help_window.set_text(@skill.name, 1)            # Show skill name

    @animation1_id = @skill.animation1_id            # Set attacker animation

    @animation2_id = @skill.animation2_id            # Set target animation

    #

    for target in @target_battlers                    # Cycle through targets

      next if target.nil?                            # Skip any invalid

      target.skill_effect(@active_battler, @skill)    # Apply skill result

    end

    #

  end

  #--------------------------------------------------------------------------

  # * Frame Update (main phase collateral action : item attack)

  #--------------------------------------------------------------------------

  def collateral_action_item

    #

    halved  = @active_battler.collateral_halved      # Get attack halved stat

    @item.collateral_halved = halved                  # Set halved stat to item

    #

    @help_window.set_text(@item.name, 1)              # Display item name

    @animation1_id = @item.animation1_id              # Set attacker animation

    @animation2_id = @item.animation2_id              # Set target animation

    #

    for target in @target_battlers                    # Cycle through targets

      next if target.nil?                            # Skip any invalid

      target.item_effect(@item)                      # Apply item result

    end

    #

    @item.collateral_halved = false                  # Remove halved stat

    #

  end

end

Instructions

All within the script.

Compatibility

Fairly compatible for RPGMaker XP systems other than the optional direct edits described. However, said edits are not necessary IF you choose not to employ half-damage from collateral strikes.

Terms and Conditions

Free to use, even in commercial projects. However, I will need some form of due credit for both myself and Bennerdeben... even if but a mere mention in some end titles.

**Bennerdeben**

Tested it and works flawlessly so far Winking

Thanks!

**Bennerdeben** · 11-10-2024, 08:55 AM

I noticed something about the double hit skill if you set the scope to 0 and Must Hit on false:
If you hit an enemy you see one hit action that show the damage text (the accumulated damage, so instead of two times 12 damage you see one time 24 damage) and two skill animations.
And if you miss you see the "miss" text one time while showing two skill animations.

The hit action goes as follows:
[skill animation]
[damage text <- doubled damage]
[skill animation]
[end turn]

The miss action goes as follows:
[skill animation]
[miss text]
[skill animation]
[end turn]

Also when you miss automatically both attacks are missed.
The skill is set to:

Code:
#     ID    Type  Chance  Must Hit  Halved

SKILL[85] = [ 0,  100,    false,    false ]

I also tried setting it to this:

Code:
#     ID    Type  Chance  Must Hit  Halved

SKILL[85] = [ 0 ]

but it doesnt make a change

Login
Username:
Password:	Lost Password?
	Remember me

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	Weapons Blocked from Attacks	DerVVulfman	0	909	12-03-2023, 03:41 AM Last Post: DerVVulfman
	Enemy Melee Status Attacks	DerVVulfman	3	8,814	10-15-2015, 07:22 PM Last Post: Steel Beast 6Beets