ATOA Status Effect Pops

[DerVVulfman]

ATOA Status Effect Pops
Version: 1.1

Introduction
This script creates a new damage pop option for the ATOA ACBS system, now drawing status effect/ailment names along when a character is so effected while in battle.

Like the original system, graphics for status damage pops are kept within the Graphics\Digits folder. Otherwise, it will draw damage pops using the more traditional draw_text method.


Script

"Here there be script"

Code:

#==============================================================================
# ** ATOA Status Effect Pops
#------------------------------------------------------------------------------
#    by DerVVulfman
#    version 1.1
#    1-10-2016 (mm/dd/yyyy)
#    RGSS / RPGMaker XP
#
#==============================================================================
#  
#  INTRODUCTION:
#
#  This script creates a new damage pop option for the ATOA ACBS system, now
#  drawing status effect/ailment names along when a character is so effected
#  while in battle.
#
#  Like the original system, graphics for status damage pops are kept within
#  the Graphics\Digits folder. Otherwise, it will draw damage pops using the
#  more traditional draw_text method.
#
#  NOTE: Mix match of graphically rendered and text drawn damage pops is not
#        visually recommended.  Both handle positioning differently.
#
#  This script is an add-on for Atoa's ACBS.
#
#------------------------------------------------------------------------------
#
#  INSTALLATION:
#
#  Paste below Atoa's ACBS system.
#
#  The configurations are explained below.
#
#------------------------------------------------------------------------------
#
#  CONFIGURATION:
#
#  These are going to be quickly explained.  There's not a lot really TO
#  explain about them.
#
#  Basic values:
#
#  * Dmg_State_Max
#    This sets the maximum number of damage pops that will show at one time.
#    I do not recommend going above 3 as it may appear crowded.
#
#  * Dmg_State_X_Adjust
#    Like the Atoa ACBS system, there is an extra X-Position adjustment value
#    you can use.  A setting of 0 should keep it horizontally aligned with all
#    other damage pops of the same style.
#
#  * Dmg_State_Y_Adjust
#    This determines the vertical position of your damage pops, either above
#    or below the ones normally generated.  Negative values are above the
#    default pops while positive will be positioned below.  
#
#  * Dmg_State_Height
#    This sets how much vertical space is between each status damage pop.
#
#  * Dmg_Default_Text
#    This is used when a status damage pop is being generated and no custom
#    status effect name (below) is defined.  If this value is set to true, then
#    it will use the default name in the database.  If set to false, then it
#    will not render the status damage pop.
#
#  * Dmg_State_Skip
#    This allows you to define what status ailments are not to be shown, even
#    if the game is set to permit default status effect names (above).  Just
#    set the IDs of the states in the array.
#
#
#  Extended values:
#
#  * Dmg_State_Pops
#    This is a hash array where you set the name for each status effect to
#    show.  If a graphic of the same name is in the Graphics\Digits folder,
#    it will render that graphic as the damage pop.  Otherwise, it will show
#    this name using default text methods.  If a state pop is being generated
#    and no name is in this hash array, it will either show the default name
#    stored in the database or just 'not' show the pop, depending upon the
#    value set by the Dmg_Default_Text value (above).
#
#  * Dmg_State_Color
#    When a status damage pop is rendered, it is of a custom color.  This
#    array sets the default color in the [red, green, blue] format.  It can
#    be overwritten by individual color settings described below.
#
#  * Dmg_State_Colors
#    This is a hash array where you set the color for each status effect to
#    show.  If no color is defined for a given state, it will use the default
#    color above.
#
#  * Dmg_State_Dur
#    When a status damage pop is rendered, it is to stay on the screen for
#    a set period of time in frames.  This is where you set the number of
#    frames (default = 40).
#
#  * Dmg_State_Durs
#    This is a hash array where you allow some status effect pops to show
#    longer or to vanish quicker than others.  If no value is listed, it will
#    use the default duration as set by the Dmg_State_Dur value above.
#
#
#==============================================================================
#
#  TERMS AND CONDITIONS:
#
#  Free for use, even in commercial games.   And as this script was requested
#  by Noctis, you have to give both of us credit for this script.
#
#==============================================================================

module Atoa
  #----------------------------------------------------------------------------
  Dmg_State_Pops    = {}        # Do Not Touch
  Dmg_State_Colors  = {}        # Do Not Touch
  Dmg_State_Durs    = {}        # Do Not Touch
  #----------------------------------------------------------------------------

  # State Pop Values
  # ---------------------------------------------------------------------------
  # Basis values to set that control the system.
  #
    Dmg_State_Max       = 3     # Max # of State pops (Recommend no more than 3)
    Dmg_State_X_Adjust  = 0     # X position adjustment for State Pops
    Dmg_State_Y_Adjust  = -48   # Y position adjustment for State Pops
    Dmg_State_Height    = 16    # Vertical Space between State Pops
    Dmg_Default_Text    = true  # If true and no damage pop defuned, use default
    Dmg_State_Skip      = [4,5] # Array of states NOT to show pops
    
    
  # State Pop Names
  # ---------------------------------------------------------------------------
  # Renames the damage pops or acts as filenames for graphic pops to show.
  # If a filename, assumes graphic is in the Graphics\Digits folder.
  #
    Dmg_State_Pops[2] = "Slammed"     # Changes stunned state name to Slammed
    Dmg_State_Pops[3] = "POISON"    # Changes venom state name to Poisoned
    

  # State Pop Colors
  # ---------------------------------------------------------------------------
  # Used only with damage pops drawn with the more traditional draw_text
  # method, this sets the color of rendered text.  Not used with graphic
  # image pops.
  #
    Dmg_State_Color     = [128,0,128] # Default color set to dark purple
    # -------------------------------------------------------------------------
    Dmg_State_Colors[2] = [255,0,0]   # Red color for Slammed/Stun state
    Dmg_State_Colors[3] = [0,255,0]   # Green color for Poisoned/Venom state
    Dmg_State_Colors[9] = [255,128,0] # Orange color for Weaken state
  
    
  # State Pop Colors
  # ---------------------------------------------------------------------------
  # Used only with damage pops drawn with the more traditional draw_text
  # method, this sets the color of rendered text.  Not used with graphic
  # image pops.
  #
    Dmg_State_Dur       = 40          # Default state effect duration
    # -------------------------------------------------------------------------
    Dmg_State_Durs[2]   = 80          # 2 second duration for stuns
    Dmg_State_Durs[3]   = 60          # 1 1/2 seconds for venom
    
end



#==============================================================================
# ** Atoa Module
#==============================================================================
$atoa_script = {} if $atoa_script.nil?
$atoa_script['Atoa StatePops'] = true



#==============================================================================
# ** RPG::Sprite
#------------------------------------------------------------------------------
# Class that manages Sprites exhibition
#==============================================================================

class RPG::Sprite < ::Sprite
  #--------------------------------------------------------------------------
  # * Alias Listings
  #--------------------------------------------------------------------------
  alias status_pops_damage damage
  #--------------------------------------------------------------------------
  # * Set Damage Pop
  #     value     : Damage value
  #     critical  : Critical flag
  #     sp_damage : SP Damage flag
  #--------------------------------------------------------------------------
  def damage(value, critical, sp_damage = nil)
    # Create temporary damage state array
    temp_dmg_states = []
    # Push new damage states into array
    temp_dmg_states += @battler.state_to_add unless @battler.state_to_add == []
    # Perform the original call
    status_pops_damage(value, critical, sp_damage)
    return if temp_dmg_states == []
    # Take only up to the max number of states to show
    temp_dmg_states = temp_dmg_states[0,Atoa::Dmg_State_Max]
    # Reverse order if drawing above normal damage pop
    temp_dmg_states.reverse if Dmg_State_Y_Adjust < 0
    # Cycle through temporary damage state array
    for i in 0..temp_dmg_states.size-1
      # Get state ID from list
      state_id = temp_dmg_states[i]
      # Skip if the state is a no-show state (no pop)
      next if Atoa::Dmg_State_Skip.include?(state_id)
      # Get height position)
      state_ht = (i * Atoa::Dmg_State_Height) + Dmg_State_Y_Adjust
      # Determine if a valid graphic exists or if text
      test_pop = false
      begin
        testbitmap = RPG::Cache.digits(Atoa::Dmg_State_Pops[state_id])
      rescue
        test_pop = true
      end      
      # Branch if text pop or graphic
      if test_pop == true
        damage_state_pop_texts(i, state_id, state_ht)
      else
        damage_state_pop_graphics(i, state_id, state_ht)
      end
    end
  end
  #--------------------------------------------------------------------------
  # * Set State Damage Pop from Graphic
  #     i         : counter index of state in state pops applied
  #     state_id  : actual status ailment ID in database
  #     state_ht  : height position to be drawn in respect to pop
  #--------------------------------------------------------------------------
  def damage_state_pop_graphics(i, state_id, state_ht)
    # Determine last sprite drawn among all damage pops
    newpopsize = @_damage_sprites.size
    # Get duration for individual state
    state_dur = Atoa::Dmg_State_Dur
    if Atoa::Dmg_State_Durs.has_key?(state_id)
      state_dur = Atoa::Dmg_State_Durs[state_id]
    end
    # Grab the actual image from the folder
    bitmap    = RPG::Cache.digits(Atoa::Dmg_State_Pops[state_id])
    # Set sprite number, delay and x/y position
    j         = newpopsize + i
    dmg_delay = Multi_Pop ? i : 1
    x         = Dmg_State_X_Adjust
    y         = state_ht - self.oy / 3
    # Draw the state damage sprite
    damage_state_sprite_drawing(bitmap, state_dur, dmg_delay, j, x, y)
  end
  #--------------------------------------------------------------------------
  # * Set State Damage Pop from Text
  #     i         : counter index of state in state pops applied
  #     state_id  : actual status ailment ID in database
  #     state_ht  : height position to be drawn in respect to pop
  #--------------------------------------------------------------------------
  def damage_state_pop_texts(i, state_id, state_ht)
    # Determine last sprite drawn among all damage pops
    newpopsize = @_damage_sprites.size
    # Get duration for individual state
    state_dur = Atoa::Dmg_State_Dur
    if Atoa::Dmg_State_Durs.has_key?(state_id)
      state_dur = Atoa::Dmg_State_Durs[state_id]
    end
    # Get damage pop string from state ID
    damage_string = Atoa::Dmg_State_Pops[state_id]
    # Either use the default name or exit if no replacement string
    if damage_string.nil?
      if Atoa::Dmg_Default_Text == true
        damage_string = $data_states[state_id].name
      else
        return
      end
    end
    # Get the color for the status damage pop
    state_color = Atoa::Dmg_State_Color
    if Atoa::Dmg_State_Colors.has_key?(state_id)
      state_color = Atoa::Dmg_State_Colors[state_id]
    end
    # Set the color
    pop_damage_color = [state_color[0], state_color[1], state_color[2]]
    # Cycle through individual letters in text
    for k in 0...damage_string.size
      # Obtain letter
      letter = damage_string[k..k]
      # Create new bitmap for letter and draw
      bitmap = Bitmap.new(160, 48)
      bitmap.font.name = Damage_Font
      bitmap.font.size = Dmg_Font_Size
      # Set black font outline and draw outline
      bitmap.font.color.set(0, 0, 0)
      bitmap.draw_text(-1, 12-1,160, 36, letter, 1)
      bitmap.draw_text(+1, 12-1,160, 36, letter, 1)
      bitmap.draw_text(-1, 12+1,160, 36, letter, 1)
      bitmap.draw_text(+1, 12+1,160, 36, letter, 1)
      # Set pop color and draw text
      bitmap.font.color.set(*pop_damage_color)
      bitmap.draw_text(0, 12,160, 36, letter, 1)
      # Set sprite number, delay and x/y position
      j         = newpopsize + k
      dmg_delay = Multi_Pop ? i : 1
      x         = Dmg_State_X_Adjust + 32 + k * Dmg_Space - (damage_string.size * 8)
      y         = state_ht - self.oy / 3
      # Draw the state damage sprite
      damage_state_sprite_drawing(bitmap, state_dur, dmg_delay, j, x, y)
    end
  end
  #--------------------------------------------------------------------------
  # * Set State Damage Pop from Text
  #     bitmap    : bitmap passed into drawn sprite
  #     state_dur : amount of delay adjusted for individual state
  #     delay     : amount of delay adjusted for characters in pop
  #     count     : counter for individual sprite drawn (increases for each)
  #     x         : x-position of damage pop sprite being adjusted
  #     y         : y-position of damage pop sprite being adjusted
  #--------------------------------------------------------------------------
  def damage_state_sprite_drawing(bitmap, state_dur, delay, count, x, y)
    dmg_delay = Multi_Pop ? i : 1
    dmg_adjust = Damage_Sprite ? 32 : 96
    @_damage_sprites[count] = ::Sprite.new(self.viewport)
    @_damage_sprites[count].bitmap  = bitmap
    @_damage_sprites[count].ox      = dmg_adjust
    @_damage_sprites[count].oy      = 20
    @_damage_sprites[count].x = self.x + Dmg_X_Adjust + x
    @_damage_sprites[count].y = self.y + Dmg_Y_Adjust + y
    @_damage_sprites[count].z = state_dur + 3000 + dmg_delay * 2
    @_damage_sprites[count].opacity = 0          
  end
end

Instructions
In the script as always.


Notes
Mix match of graphically rendered and text drawn damage pops is not visually recommended. Both handle positioning differently.


Compatibility
For use with Atoa's (Victor Sant's) ACBS system.


Terms and Conditions
Free for use, even in commercial games. And as this script was requested by Noctis, you have to give both of us credit for this script.