ZLSL's Battle Portraits

[DerVVulfman]

ZLSL's Battle Portraits
Version: 1.2

Introduction
This script allows you to display an 'extra' shot of your hero-in-action within your default battlesystem when it is his or her turn to choose what action to take. That is, you can display a large portrait of the hero or heroine when the [ Actor Command Window ] ( Attack|Skill|Item|Defend ) is visible and active.



Demo
None. This one's pretty simple in implementation.



Script

Here you go!

Code:

#==============================================================================
# ** ZLSL's Battle Portraits
#------------------------------------------------------------------------------
#    version 1.1
#    by DerVVulfman
#    11-10-2019 (MM-DD-YYYY)
#    RGSS / RPGMaker XP
#------------------------------------------------------------------------------
#
#  INTRODUCTION:
#
#  This script allows you  to display an 'extra' shot  of your hero-in-action
#  within your default battlesystem when it is his or her turn to choose what
#  action to take.   That is, you can display a large portrait of the hero or
#  heroine when the [ Actor Command Window ] ( Attack|Skill|Item|Defend )  is
#  visible and active.
#
#  It works on most default-styled  strategic battle systems  such as the one
#  that comes with RPGMaker XP.  And these hero portraits  will appear behind
#  the battlestatus window  while simultaneously be  in front of all battlers
#  in the battlefield.
#
#
#------------------------------------------------------------------------------
#
#  INSTALLATION:
#
#  Place this script below Scene_Debug and above Main.  If it is in use with
#  with a custom battle system, it must be placed below such a system.
#
#  Configure the position where the portaits will be shown.  This is done in
#  the ZLSL_Portraits module.
#
#------------------------------------------------------------------------------
#
#  RESOURCES:
#
#  This script requires new portait resources.  They can be stock default RTP
#  battlers, but it would seem preferable to have larger graphics in order to
#  highlight the heroes.
#
#  These graphics must be stored in a custom Graphics\BPortrait folder.   The
#  folder is cachable.   This means it will cache and compress if oyu do wish
#  to compress and encrypt your game.  Nice, eh?
#
#==============================================================================
#
#  THANKS:
#
#  Thanks to zlsl who requested the system.  I figured... I had about ten
#  minutes to kill.
#
#------------------------------------------------------------------------------
#
#  COMPATIBILITY:
#
#  Fairly compatible for RPGMaker XP systems. It doesn't rewrite any methods
#  in the system.  But it does attach a Keyring item to the Scene_Item class.
#
#------------------------------------------------------------------------------
#
#  TERMS OF USE:
#
#  Free for use, even in commercial games.  Only due credit is required.
#  That includes credit for zlsl as well as my own.
#
#
#==============================================================================


module ZLSL_Portraits


  X_POS = 240   # X-Position of battler in the viewport
  Y_POS = 320   # Y-Position of battler in the viewport


end



#==============================================================================
# ** RPG::Cache
#------------------------------------------------------------------------------
#  The module that loads each of RPGXP's graphic formats, creates a Bitmap
#  object, and retains it.
#==============================================================================

module RPG::Cache
  #------------------------------------------------------------------------
  # * Battle Portait
  #     filename : filename of the cached bitmap
  #     hue      : hue of the cached bitmap
  #------------------------------------------------------------------------
  def self.bportait(filename, hue=0)
    begin
      self.load_bitmap("Graphics/BPortrait/", filename, hue)
    rescue
      self.load_bitmap("Graphics/BPortrait/", "", hue)
    end
  end
end



#==============================================================================
# ** Game_Temp
#------------------------------------------------------------------------------
#  This class handles temporary data that is not included with save data.
#  Refer to "$game_temp" for the instance of this class.
#==============================================================================

class Game_Temp
  #--------------------------------------------------------------------------
  # * Public Instance Variables
  #--------------------------------------------------------------------------
  attr_accessor :battle_in_action          # battle callback (Proc)
  #--------------------------------------------------------------------------
  # * Object Initialization
  #--------------------------------------------------------------------------
  alias oogabooga initialize
  def initialize
    oogabooga
    @battle_in_action = nil
  end
end



#==============================================================================
# ** Game_Party
#------------------------------------------------------------------------------
#  This class handles the party. It includes information on amount of gold
#  and items. Refer to "$game_party" for the instance of this class.
#==============================================================================

class Game_Party
  #--------------------------------------------------------------------------
  # * Public Instance Variables
  #--------------------------------------------------------------------------
  attr_reader   :party_size
end



#==============================================================================
# ** Sprite_BattlerProfile
#------------------------------------------------------------------------------
#  This sprite is used to display the battler.It observes the Game_Character
#  class and automatically changes sprite conditions.
#==============================================================================

class Sprite_BattlerProfile < RPG::Sprite
  #--------------------------------------------------------------------------
  # * Public Instance Variables
  #--------------------------------------------------------------------------
  attr_accessor :battler                  # battler
  #--------------------------------------------------------------------------
  # * Object Initialization
  #     viewport : viewport
  #     battler  : battler (Game_Battler)
  #--------------------------------------------------------------------------
  def initialize(viewport, battler = nil)
    super(viewport)
    @battler = battler
    @battler_visible = false
  end
  #--------------------------------------------------------------------------
  # * Dispose
  #--------------------------------------------------------------------------
  def dispose
    self.bitmap.dispose unless self.bitmap.nil?
    super
  end
  #--------------------------------------------------------------------------
  # * Frame Update
  #--------------------------------------------------------------------------
  def update
    super
    # If battler is nil
    if @battler == nil
      self.bitmap = nil
      return
    end
    # If file name or hue are different than current ones
    if @battler.battler_name != @battler_name or
       @battler.battler_hue != @battler_hue
      # Get and set bitmap
      @battler_name = @battler.battler_name
      @battler_hue  = @battler.battler_hue
      self.bitmap   = RPG::Cache.battler(@battler_name, @battler_hue)
      @width        = bitmap.width
      @height       = bitmap.height
      self.ox       = @width / 2
      self.oy       = @height
    end
    # Bring opacity level down a bit when not in main phase
    if $game_temp.battle_in_action == nil
      self.opacity = 0
    elsif $game_temp.battle_in_action == @battler
      self.opacity = 255
    else
      self.opacity = 0
    end
    # Set sprite coordinates
    self.x  = ZLSL_Portraits::X_POS
    self.y  = ZLSL_Portraits::Y_POS
    self.z  = 0
  end
end



#==============================================================================
# ** Spriteset_Battle
#------------------------------------------------------------------------------
#  This class brings together battle screen sprites. It's used within
#  the Scene_Battle class.
#==============================================================================

class Spriteset_Battle
  #--------------------------------------------------------------------------
  # * Public Instance Variables
  #--------------------------------------------------------------------------
  attr_reader   :viewporthero             # battler portrait viewport
  #--------------------------------------------------------------------------
  # * Alias Listings
  #--------------------------------------------------------------------------
  alias zlslbportait_spriteset_initialize initialize
  alias zlslbportait_spriteset_dispose dispose
  alias zlslbportait_spriteset_update update
  #--------------------------------------------------------------------------
  # * Object Initialization
  #--------------------------------------------------------------------------
  def initialize
    # Make viewports
    @viewporthero     = Viewport.new(0, 0, 640, 320)
    @viewporthero.z   = 50
    # Acquire current number of battlers
    party_size = zlslbportait_function_update_actor_party_size
    # Make actor sprites
    @figure_sprites = []
    for i in 0...party_size
      @figure_sprites.push(Sprite_BattlerProfile.new(@viewporthero))
    end
    # Perform the original call
    zlslbportait_spriteset_initialize
  end
  #--------------------------------------------------------------------------
  # * Frame Update : zlsl Battler Portait Function - Acquire Party Size
  #--------------------------------------------------------------------------
  def zlslbportait_function_update_actor_party_size
    # Set current number of battlers
    return_value = 4
    return_value = $game_party.party_size if $game_party.party_size != nil
    return return_value
  end  
  #--------------------------------------------------------------------------
  # * Dispose
  #--------------------------------------------------------------------------
  def dispose
    # Perform the original call
    zlslbportait_spriteset_dispose
    # Dispose of enemy sprites and actor sprites
    for sprite in @figure_sprites
      sprite.dispose
    end
    @viewporthero.dispose
  end  
  #--------------------------------------------------------------------------
  # * Frame Update
  #--------------------------------------------------------------------------
  def update
    # Acquire current number of battlers
    party_size = zlslbportait_function_update_actor_party_size
    # Update actor sprite contents (corresponds with actor switching)
    for i in 0...party_size
      @figure_sprites[i].battler = $game_party.actors[i]
    end  
    # Update battler sprites
    for sprite in @figure_sprites
      sprite.update
    end    
    # Perform the original call
    zlslbportait_spriteset_update
    # Update viewport
    @viewporthero.update    
  end
end



#==============================================================================
# ** Scene_Battle
#------------------------------------------------------------------------------
#  This class performs battle screen processing.
#==============================================================================

class Scene_Battle
  #--------------------------------------------------------------------------
  # * Alias Listings
  #--------------------------------------------------------------------------
  alias zlslbportait_battle_main main
  alias zlslbportait_battle_start_phase2 start_phase2
  alias zlslbportait_battle_start_phase3 start_phase3
  alias zlslbportait_battle_phase3_set_cmd_window phase3_setup_command_window
  alias zlslbportait_battle_start_phase4 start_phase4
  #--------------------------------------------------------------------------
  # * Main Processing
  #--------------------------------------------------------------------------
  def main
    # Kill the flag for the spriteset window
    $game_temp.battle_in_action = nil
    # Perform the original call
    zlslbportait_battle_main
  end
  #--------------------------------------------------------------------------
  # * Start Actor Command Phase
  #--------------------------------------------------------------------------
  def start_phase2
    # Kill the flag for the spriteset window
    $game_temp.battle_in_action = nil
    # Perform the original call
    zlslbportait_battle_start_phase2
  end  
  #--------------------------------------------------------------------------
  # * Start Actor Command Phase
  #--------------------------------------------------------------------------
  def start_phase3
    # Kill the flag for the spriteset window
    $game_temp.battle_in_action = nil
    # Perform the original call
    zlslbportait_battle_start_phase3
  end
  #--------------------------------------------------------------------------
  # * Actor Command Window Setup
  #--------------------------------------------------------------------------
  def phase3_setup_command_window
    # Set the flag for the spriteset window (actual battler!)
    $game_temp.battle_in_action = @active_battler
    # Perform the original call
    zlslbportait_battle_phase3_set_cmd_window
  end  
  #--------------------------------------------------------------------------
  # * Start Actor Command Phase
  #--------------------------------------------------------------------------
  def start_phase4
    # Kill the flag for the spriteset window
    $game_temp.battle_in_action = nil
    # Perform the original call
    zlslbportait_battle_start_phase4
  end  
end

Instructions
Place this script below Scene_Debug and above Main. If it is in use with with a custom battle system, it must be placed below such a system.

Configure the position where the portaits will be shown. This is done in the ZLSL_Portraits module.



Compatibility
Thanks to zlsl who requested the system. I figured... I had about ten minutes to kill.



Credits and Thanks
˂If you're using graphics made or scripts written by others, or have someone to thank, do it here. This section is optional if you have no one to mention.˃



Terms and Conditions
Free for use, even in commercial games. Only due credit is required. That includes credit for zlsl as well as my own.

[kyonides]

To be honest with you, I would have define the party size method used in Spriteset_Battle as you can see in the code snippet below...

Code:

def zlslbportait_function_update_actor_party_size
    # Set current number of battlers
    return $game_party.party_size || 4
  end

And yeah, as zlsl has already noticed, you didn't include any party_size method in Game_Party...

[DerVVulfman]

BUMP
to version 1.1

I neglected to include recognition of a 'party_size' value within the Game_Party class. This value is typically nil and unused by the script. However, I recognize that other scripts that increase the size of the default system's party beyond 4-members uses this value.  If detected, then this new value will be used instead.

So... no. The party_size value does not define the size of the party within this script, it is a hook used by other scripts.

[zlsl]

ZLSL's Battle Portraits
Version: 1.1

Introduction
This script allows you  to display an 'extra' shot  of your hero-in-action within your default battlesystem when it is his or her turn to choose what action to take.  That is, you can display a large portrait of the hero or heroine when the [ Actor Command Window ] ( Attack|Skill|Item|Defend )  is visible and active.



Demo
None.  This one's pretty simple in implementation.



Script

Here you go!

Code:

#==============================================================================
# ** ZLSL's Battle Portraits
#------------------------------------------------------------------------------
#    version 1.1
#    by DerVVulfman
#    11-10-2019 (MM-DD-YYYY)
#    RGSS / RPGMaker XP
#------------------------------------------------------------------------------
#
#  INTRODUCTION:
#
#  This script allows you  to display an 'extra' shot  of your hero-in-action
#  within your default battlesystem when it is his or her turn to choose what
#  action to take.   That is, you can display a large portrait of the hero or
#  heroine when the [ Actor Command Window ] ( Attack|Skill|Item|Defend )  is
#  visible and active.
#
#  It works on most default-styled  strategic battle systems  such as the one
#  that comes with RPGMaker XP.  And these hero portraits  will appear behind
#  the battlestatus window  while simultaneously be  in front of all battlers
#  in the battlefield.
#
#
#------------------------------------------------------------------------------
#
#  INSTALLATION:
#
#  Place this script below Scene_Debug and above Main.  If it is in use with
#  with a custom battle system, it must be placed below such a system.
#
#  Configure the position where the portaits will be shown.  This is done in
#  the ZLSL_Portraits module.
#
#------------------------------------------------------------------------------
#
#  RESOURCES:
#
#  This script requires new portait resources.  They can be stock default RTP
#  battlers, but it would seem preferable to have larger graphics in order to
#  highlight the heroes.
#
#  These graphics must be stored in a custom Graphics\BPortrait folder.   The
#  folder is cachable.   This means it will cache and compress if oyu do wish
#  to compress and encrypt your game.  Nice, eh?
#
#==============================================================================
#
#  THANKS:
#
#  Thanks to zlsl who requested the system.  I figured... I had about ten
#  minutes to kill.
#
#------------------------------------------------------------------------------
#
#  COMPATIBILITY:
#
#  Fairly compatible for RPGMaker XP systems. It doesn't rewrite any methods
#  in the system.  But it does attach a Keyring item to the Scene_Item class.
#
#------------------------------------------------------------------------------
#
#  TERMS OF USE:
#
#  Free for use, even in commercial games.  Only due credit is required.
#  That includes credit for zlsl as well as my own.
#
#
#==============================================================================


module ZLSL_Portraits


 X_POS = 240   # X-Position of battler in the viewport
 Y_POS = 320   # Y-Position of battler in the viewport


end



#==============================================================================
# ** RPG::Cache
#------------------------------------------------------------------------------
#  The module that loads each of RPGXP's graphic formats, creates a Bitmap
#  object, and retains it.
#==============================================================================

module RPG::Cache
 #------------------------------------------------------------------------
 # * Battle Portait
 #     filename : filename of the cached bitmap
 #     hue      : hue of the cached bitmap
 #------------------------------------------------------------------------
 def self.bportait(filename, hue=0)
   begin
     self.load_bitmap("Graphics/BPortrait/", filename, hue)
   rescue
     self.load_bitmap("Graphics/BPortrait/", "", hue)
   end
 end
end



#==============================================================================
# ** Game_Temp
#------------------------------------------------------------------------------
#  This class handles temporary data that is not included with save data.
#  Refer to "$game_temp" for the instance of this class.
#==============================================================================

class Game_Temp
 #--------------------------------------------------------------------------
 # * Public Instance Variables
 #--------------------------------------------------------------------------
 attr_accessor :battle_in_action          # battle callback (Proc)
 #--------------------------------------------------------------------------
 # * Object Initialization
 #--------------------------------------------------------------------------
 alias oogabooga initialize
 def initialize
   oogabooga
   @battle_in_action = nil
 end
end



#==============================================================================
# ** Game_Party
#------------------------------------------------------------------------------
#  This class handles the party. It includes information on amount of gold
#  and items. Refer to "$game_party" for the instance of this class.
#==============================================================================

class Game_Party
 #--------------------------------------------------------------------------
 # * Public Instance Variables
 #--------------------------------------------------------------------------
 attr_reader   :party_size
end



#==============================================================================
# ** Sprite_BattlerProfile
#------------------------------------------------------------------------------
#  This sprite is used to display the battler.It observes the Game_Character
#  class and automatically changes sprite conditions.
#==============================================================================

class Sprite_BattlerProfile < RPG::Sprite
 #--------------------------------------------------------------------------
 # * Public Instance Variables
 #--------------------------------------------------------------------------
 attr_accessor :battler                  # battler
 #--------------------------------------------------------------------------
 # * Object Initialization
 #     viewport : viewport
 #     battler  : battler (Game_Battler)
 #--------------------------------------------------------------------------
 def initialize(viewport, battler = nil)
   super(viewport)
   @battler = battler
   @battler_visible = false
 end
 #--------------------------------------------------------------------------
 # * Dispose
 #--------------------------------------------------------------------------
 def dispose
   self.bitmap.dispose unless self.bitmap.nil?
   super
 end
 #--------------------------------------------------------------------------
 # * Frame Update
 #--------------------------------------------------------------------------
 def update
   super
   # If battler is nil
   if @battler == nil
     self.bitmap = nil
     return
   end
   # If file name or hue are different than current ones
   if @battler.battler_name != @battler_name or
      @battler.battler_hue != @battler_hue
     # Get and set bitmap
     @battler_name = @battler.battler_name
     @battler_hue  = @battler.battler_hue
     self.bitmap   = RPG::Cache.battler(@battler_name, @battler_hue)
     @width        = bitmap.width
     @height       = bitmap.height
     self.ox       = @width / 2
     self.oy       = @height
   end
   # Bring opacity level down a bit when not in main phase
   if $game_temp.battle_in_action == nil
     self.opacity = 0
   elsif $game_temp.battle_in_action == @battler
     self.opacity = 255
   else
     self.opacity = 0
   end
   # Set sprite coordinates
   self.x  = ZLSL_Portraits::X_POS
   self.y  = ZLSL_Portraits::Y_POS
   self.z  = 0
 end
end



#==============================================================================
# ** Spriteset_Battle
#------------------------------------------------------------------------------
#  This class brings together battle screen sprites. It's used within
#  the Scene_Battle class.
#==============================================================================

class Spriteset_Battle
 #--------------------------------------------------------------------------
 # * Public Instance Variables
 #--------------------------------------------------------------------------
 attr_reader   :viewporthero             # battler portrait viewport
 #--------------------------------------------------------------------------
 # * Alias Listings
 #--------------------------------------------------------------------------
 alias zlslbportait_spriteset_initialize initialize
 alias zlslbportait_spriteset_dispose dispose
 alias zlslbportait_spriteset_update update
 #--------------------------------------------------------------------------
 # * Object Initialization
 #--------------------------------------------------------------------------
 def initialize
   # Make viewports
   @viewporthero     = Viewport.new(0, 0, 640, 320)
   @viewporthero.z   = 50
   # Acquire current number of battlers
   party_size = zlslbportait_function_update_actor_party_size
   # Make actor sprites
   @figure_sprites = []
   for i in 0...party_size
     @figure_sprites.push(Sprite_BattlerProfile.new(@viewporthero))
   end
   # Perform the original call
   zlslbportait_spriteset_initialize
 end
 #--------------------------------------------------------------------------
 # * Frame Update : zlsl Battler Portait Function - Acquire Party Size
 #--------------------------------------------------------------------------
 def zlslbportait_function_update_actor_party_size
   # Set current number of battlers
   return_value = 4
   return_value = $game_party.party_size if $game_party.party_size != nil
   return return_value
 end  
 #--------------------------------------------------------------------------
 # * Dispose
 #--------------------------------------------------------------------------
 def dispose
   # Perform the original call
   zlslbportait_spriteset_dispose
   # Dispose of enemy sprites and actor sprites
   for sprite in @figure_sprites
     sprite.dispose
   end
   @viewporthero.dispose
 end  
 #--------------------------------------------------------------------------
 # * Frame Update
 #--------------------------------------------------------------------------
 def update
   # Acquire current number of battlers
   party_size = zlslbportait_function_update_actor_party_size
   # Update actor sprite contents (corresponds with actor switching)
   for i in 0...party_size
     @figure_sprites[i].battler = $game_party.actors[i]
   end  
   # Update battler sprites
   for sprite in @figure_sprites
     sprite.update
   end    
   # Perform the original call
   zlslbportait_spriteset_update
   # Update viewport
   @viewporthero.update    
 end
end



#==============================================================================
# ** Scene_Battle
#------------------------------------------------------------------------------
#  This class performs battle screen processing.
#==============================================================================

class Scene_Battle
 #--------------------------------------------------------------------------
 # * Alias Listings
 #--------------------------------------------------------------------------
 alias zlslbportait_battle_main main
 alias zlslbportait_battle_start_phase2 start_phase2
 alias zlslbportait_battle_start_phase3 start_phase3
 alias zlslbportait_battle_phase3_set_cmd_window phase3_setup_command_window
 alias zlslbportait_battle_start_phase4 start_phase4
 #--------------------------------------------------------------------------
 # * Main Processing
 #--------------------------------------------------------------------------
 def main
   # Kill the flag for the spriteset window
   $game_temp.battle_in_action = nil
   # Perform the original call
   zlslbportait_battle_main
 end
 #--------------------------------------------------------------------------
 # * Start Actor Command Phase
 #--------------------------------------------------------------------------
 def start_phase2
   # Kill the flag for the spriteset window
   $game_temp.battle_in_action = nil
   # Perform the original call
   zlslbportait_battle_start_phase2
 end  
 #--------------------------------------------------------------------------
 # * Start Actor Command Phase
 #--------------------------------------------------------------------------
 def start_phase3
   # Kill the flag for the spriteset window
   $game_temp.battle_in_action = nil
   # Perform the original call
   zlslbportait_battle_start_phase3
 end
 #--------------------------------------------------------------------------
 # * Actor Command Window Setup
 #--------------------------------------------------------------------------
 def phase3_setup_command_window
   # Set the flag for the spriteset window (actual battler!)
   $game_temp.battle_in_action = @active_battler
   # Perform the original call
   zlslbportait_battle_phase3_set_cmd_window
 end  
 #--------------------------------------------------------------------------
 # * Start Actor Command Phase
 #--------------------------------------------------------------------------
 def start_phase4
   # Kill the flag for the spriteset window
   $game_temp.battle_in_action = nil
   # Perform the original call
   zlslbportait_battle_start_phase4
 end  
end

Instructions
Place this script below Scene_Debug and above Main.  If it is in use with with a custom battle system, it must be placed below such a system.

Configure the position where the portaits will be shown.  This is done in the ZLSL_Portraits module.



Compatibility
Thanks to zlsl who requested the system.  I figured... I had about ten minutes to kill.



Credits and Thanks
˂If you're using graphics made or scripts written by others, or have someone to thank, do it here. This section is optional if you have no one to mention.˃



Terms and Conditions
Free for use, even in commercial games.  Only due credit is required.  That includes credit for zlsl as well as my own.

Hi guys!
This script is great as an original, but if you want to add a little taste, see my post! Please understand that English is not my native language, so explanation is poor. I used a translator:->


The original script loads the same image as Battler.
I wanted to support battler and command battle portraits differently. 
The bitmap folder supported BPortrait, but the script did not recognize the BPortrait folder.  (ᵕ̣̣̣̣̣̣﹏ᵕ̣̣̣̣̣̣) 
I was troubled all night and modified this. It was actually a very simple way.






Just modify the pink box in the picture.


first
if @battler.battler_name != @character_name or
▲ Please search and find. And,

self.oy       = @height 
Replace with the code below !!


#-------------------------------------------------------------------------------------------------  

    if @battler.battler_name != @character_name or
       @battler.battler_hue != @character_hue
      # Get and set bitmap
      @character_name = @battler.battler_name
      @character_hue  = @battler.battler_hue
 self.bitmap   = RPG::Cache.bportrait(@character_name, @character_hue)
      @width        = bitmap.width
      @height       = bitmap.height
      self.ox       = @width / 2
      self.oy       = @height

#-------------------------------------------------------------------------------------------------  

Battle and Command Battle Portraits now support different images! Put your command portrait in the BPortrait folder!
※ Battler and Battle Portrait must have the same name !!
※ Only Atoa ATB is not supported. I will be more concerned about this problem.



Thanks to DerVVulfman and kyonides for their help!  
Everyone gave me help and advice until late. This made it possible to build the system I wanted.

[DerVVulfman]

BUMP
to version 1.2

STUPID!!! STUPID!!! STUPID!!!
Or...
BABO!!! BABO!!! BABO!!!
바보 !!! 바보 !!! 바보 !!!

I created the Cache system using tried and true methods so the BPortrait folder would properly save. But STUPID ME! I forgot to change the self.bitmap line within Sprite_BattlerProfile over from using the battler folder to the bportait folder!

Oookay. It's now fully fixed.

DerVV waves to yeodongsaeng (Little Sis)